Philips HD2060 User Manual page 20

Problem
OverÁ ow.
The time taken to
process soymilk
is longer than
instructed, but other
functions work well.
Food is burnt.
20 EN
Possible cause
A wrong function was selected. Select a correct function.
Installation was incorrect or the
perforated Á ow cup was not
installed into place.
Soymilk is too diluted or too
many beans are added.
The water level is above
(the maximum level
indication) or below
(the minimum level indication).
The appliance is broken.
The overÁ ow sensor is not
cleaned.
The voltage is too low.
The water temperature is
too low.
A wrong function is selected.
The inner side of the chamber
was not cleaned.
InsufÀ cient water is added.
Too much ingredient is added.
Solution
Make sure that the perforated
Á ow cup is correctly installed.
Put proper quantity of ingredient
as instructed in the "Use the
appliance" section.
Make sure that the water level is
between
level indication) and
(the minimum level indication).
Contact the Philips Consumer
Care Centre.
Clean the overÁ ow sensor.
Use a household power
regulator.
Add warm water no hotter
than 70 .
Select a correct function.
Clean the inner side of the
chamber.
Make sure that the water level is
between
level indication) and
(the minimum level indication).
Put proper quantity of ingredient
as instructed in the "Use the
appliance" section.
(the maximum
(the maximum