Make À Ve-Grain Soymilk - Philips HD2060 User Manual

9
After processing, disconnect the
power. Hold the handle of the
chamber tightly with one hand and
lift the head unit with the other hand.
10
Filtrate soymilk with the À lter, and it
is ready to serve. You can add some
sugar before serving.
Soymilk can also be served
•
without being À ltrated.
Make À ve-grain soymilk
Measure ingredients as instructed.
•
You can adjust the quantity a bit as
per your personal taste.
Example recipe: rice and soy bean
•
milk, for 2-4 people.
Note
Make sure that the perforated Á ow
•
cup is installed correctly before use.
1
Take 30 g of soybeans (around
1/2 cup) and 50 g of rice (around
1/2 cup) with the supplied measuring
cup and wash them clean.
To increase the life of the blade,
•
soak the soybeans (8-9 hours
in fall and spring, 6-7 hours in
summer, and 9-10 hours in
winter) and wash them clean
before processing.
2
Install the perforated Á ow cup and
rotate it to the correct position, as
shown in the illustration.
» Make sure that it cannot be
pulled off.
3
Put rice and the soybeans evenly
at the bottom of the chamber to
prevent them from touching the
perforated Á ow cup.
4
Pour water into the chamber.
Make sure that the water level is
between
level indication) and
minimum level indication).
To shorten the processing time,
•
you can add warm water no hotter
than 70 .
5
Put the head unit into the chamber.
Make sure that the upper plug is
correctly inserted into the connector.
(the maximum
(the
EN 11