Changing Hydraulic Fluid Filter - Graco 249318 Repair Manual

Changing Hydraulic Fluid Filter

Removal
1. Relieve pressure, page 5.
2. Loosen and remove hose (101) from fitting (103).
3. Remove filter housing (111) from reservoir (64).
4. Remove bottom filer cap (155) from housing (111).
5. Pull filter (108) off cap (155).
26
Installation
1. Install new o-ring (113) from kit.
2. Install new filter (108) over cap (155).
3. Install cap (155) and filter (108) in filter housing
4. Install filter housing (111) into reservoir.
5. Install fitting (103) in filter housing (111). Torque to
6. Reattach hose (101) to fitting (103). Torque to 450 +
103
111
108
(111). Hand tighten cap till snug. Then torque to 375
+ 10 in-lb (42 + 1.1 N•m).
600 + 10 in-lb (67.8 + 1.1 N.m).
10 in-lbs (51 + 1.1 N•m).
101
113
155
ti7763
Changing Hydraulic Fluid Filter
311283D