Alternate Belt Removal And Installation - Graco 249318 Repair Manual

Alternate Belt Removal and Installation

Removing Belt
a. Loosen engine bolts (21) to relieve tension on
belt.
b. Slide belt off pulleys.
Installing Belt
a. Install belt (19) over small (6) and large (4)
pulleys.
21
311283D
b. Tighten engine bolts (21). Torque to 225 + 10
c. Check belt (19) alignment on both large (4) and
NOTE: If belt is not aligned properly, to adjust belt, slowly
pull engine recoil while at the same time pushing or pull-
ing belt to reposition over pulley.
19
Hydraulic Pump Replacement
in-lb (25.4 + 1.1 N.m).
small pulley (6). When properly positioned over
pulleys, belt should be centered on pulleys and
completely over all grooves.
ti7834
Properly Aligned
4
6
ti7870
ti7837
Not Aligned Properly
21