Note!
The Time Saver function answers calls after approximately 6
ring signals, until the first new message has been registered
- then the answering machine switches to answering after
approximately 2 signals. This is useful when using remote
access; if you call up the answering machine and there is
no reply after four rings that means there are no messages
recorded and you can hang up before you are charged for
the call.
Use from handset
If there are new messages, New msg/New msgs are
displayed. Playback always starts with new messages.
Press w/0. Scroll to Answer machine. Press w/0.
1.
Scroll to Playback. Press w/0.
2.
3.
During playback the following commands are available:
2
4
5
6
q
v/V
On/Off
Press w/0. Scroll to Answer machine. Press w/0.
1.
2.
Scroll to Answer On/Off. Press w/0.
3.
Scroll to desired setting. Press w/0.
English
Delete current message
Skip to previous
Stop playback
Skip forward
Speaker OFF/ON
Volume control (side keys)
16