Recording Voice Memos - Canon JX500 User Manual

4
Use [ ] or [ ] to select <TOLL SAVER>, then press [Start]. The LCD displays
<ON>.
5
Use [ ] or [ ] to select <ON>, then press [Start].
6
Press [Stop].
Setting ends and the fax returns to standby mode.

Recording Voice Memos

Use this feature when you are going out and want to leave a message for another member of the
family. Use the Handset on the fax to record your voice memo.
Only one voice memo, 60, 120, or 240 seconds*, can be recorded. If you record a new voice memo
when there is already a voice memo recorded, the old voice memo will be deleted.
1
Press [Menu].
2
Use [ ] or [ ] to select <MSG REGISTRATION>, then press [Start].
3
Use [ ] or [ ] to select <VOICE MEMO>, then press [Start].
4
Use [ ] or [ ] to select <RECORD>, then press [Start]. The LCD displays <LIFT
HANDSET>.
5
Pick up the Handset. Press [Start] and speak into the Handset to record your voice
memo.
The remaining recording seconds is displayed on the LCD.
6
Press [Stop] when recording is finished. The LCD displays <REPLACE
HANDSET>.
7
Hang up the Handset and press [Stop].
The fax returns to standby mode.
Note
To play a voice memo, carry out step 1 to 3, select <PLAY> and then press [Start].
* The recording time for a voice memo can be set to the same settings as the recording time
for a telephone message. However, if you set 0 as the recording time for each telephone
message, voice memo recording time will be set to 60.
Using TAM Mode (FAX-JX500/JX300 only) 41