Table of Contents
Advertisement
8
Trouble shooting
8.1
Configuring your PC when not using DHCP
When accessing the modem's built-in web pages and the Configuration wizard, your
computer should be configured to use DHCP as described in previous sections.
If your settings, according to information from your ISP/service provider, does not
include the use of DHCP you have to reconfigure your PC again before you can access
the modem.
Follow the step-by-step instructions below to configure your computer to not using
DHCP.
Installation using Ethernet in Windows 95 (or higher) or USB in Windows 98:
1
From the Start menu select Settings -> Control panel. The "Control Panel" dialog
box will appear.
Double-click on the Network icon and the "Network" dialog box will appear.
2
Ethernet installation
3
Select the TCP/IP protocol according to the pictures above.
Click the Properties button and the "TCP/IP Properties" dialog box will appear.
4
72 (87)
USB installation (Windows 98)
Trouble shooting
EN/LZT1083982 R4
2000-12-07
Advertisement
Table of Contents
