Installation Using Usb (For Windows 2000 Pcs); System Requirements - Ericsson HM220d User Manual

4

Installation using USB (for Windows 2000 PCs)

This chapter describes the installation and configuration process using the USB interface
in Windows 2000 PCs.
Many computers today are shipped with a Universal Serial Bus (USB) port. With a USB
port, a Network Interface Card is not required, but a specific USB driver must be installed
on the computer. The USB driver required for the HM220d ADSL modem is provided on
the CD-ROM, and is installed during the installation phase. This driver facilitates
communication between the modem and the computer. Unlike an Ethernet connection, a
USB connection does not allow for more than one computer to be linked to the modem.
4.1

System requirements

To successfully connect and install the HM220d ADSL modem to the USB interface you
will need the following:
An ADSL-ready telephone line
133 MHz Processor and 16 MB RAM.
USB port
CD-ROM drive
Windows® 2000
Internet browser - Internet Explorer 4.06 (or higher) or Netscape Navigator 4.5 (or
higher).
From the package you will need the following:
The modem
Telephone/ADSL cable
USB cable
The power supply adapter with connecting cable
The CD-ROM disk.
24 (87)
Installation using USB (for Windows 2000 PCs)
EN/LZT1083982 R4
2000-12-07