Xytronix Research & Design WebSwitch XRDI-WS3 User Manual page 90

Revision 1.1
Accessing Setup Pages
After changing ports, the setup pages are accessed on a local network as described below:
http://(Local IP Address):(Port Number)/setup.html
For example, to access WebSwitch™ at the setup page above, the following command would be used:
http://192.168.1.25:8000/setup.html
To access the ControlByWeb™ units from the Internet, enter the public IP address of the router plus the
port number of the desired device in the following format:
http://(Public IP Address of Router):(Port Number of Device)/setup.html
Using the example above, the following line would be used to access the setup page of WebSwitch™:
http://266.70.164.97:8000/setup.html
Xytronix Research & Design, Inc.
WebSwitch™ Users Manual
89