Appendix H: Specifications - Xytronix Research & Design WebSwitch XRDI-WS3 User Manual

Revision 1.1

Appendix H: Specifications

Power Requirements:
━ Input Voltage: 100-240V AC
━ Input Frequency: 47-63Hz
━ Input Connector: IEC Appliance Connector (C14 Male)
━ Max Input Current: 10A (DO NOT USE WEBSWITCH TO CONTROL MORE THAN 10 AMPS)
Outlets:
━ Number of Outlets: 2
━ Outlet Connectors: IEC Appliance Connector (C13 Female)
━ Outlet Control Options: On/Off or Pulse
Accessory Connector (Model XRDI-WS3P only):
━ 5-position, removable terminal strip, 3.81 mm terminal spacing
Inputs (Model XRDI-WS3P only):
━ Number of Inputs: 2
━ Input Type: Discrete Inputs (connect to dry contacts)
━ Maximum Input Voltage: 5 VDC
━ Minimum Hold Time: 20ms
Temperature Sensors (Model XRDI-WS3P only):
━ "1-Wire" Digital Thermometer (Dallas Semiconductor part DS18B20)
━ Temperature Range: -20°C to 40°C ( -4°F to 104°F)
━ Accuracy: 0.5 from -10°C to +85°C
━ Maximum number of sensors: 3
━ Maximum Distance from WebSwitch™ to sensors: 120 feet with one sensor, 60 feet with three
sensors
Additional Sensors (Model XRDI-WS3P only):
━ Temperature/Humidity Sensor (X-DTHS-WM)
━ Humidity Range: 0-100%
━ Accuracy: ±1.8%
Network:
━ 10Base-T or 100Base-T Ethernet IPv4
━ Setup: static IP address assignment or DHCP, HTTP port selectable
━ Network Connector: 8-pin RJ-45 socket
LED Indicators:
━ Power On
━ Outlet 1 On
━ Outlet 2 On
━ Network Linked
━ Network Activity
Xytronix Research & Design, Inc.
WebSwitch™ Users Manual
105