Nokia ?110 User Manual page 37

Settings on SIM card
Your service provider's domain name and Web address can be stored on a
SIM card in SMS (Short Message Service) form. Your service provider may
store these settings on the SIM card before issuing you the card, or the service
provider may send a text message to your cellular phone when the SIM card
is inserted in it.
If you have the Read settings from SIM card check box selected and new
settings are found on the SIM card, you are asked to confirm whether you
want to apply them. To accept the settings from the SIM card, click Yes.
Here you can monitor the status of the connection. The following events can
be reported:
Service detected - The wireless device has detected in the network an access
controller which authenticates you to the provided services.
Connection opened - Connection to the SIM services has been successfully
established.
Connection failed - Connection to the SIM services could not be established.
Connection closed - The connection to the SIM services has ended.
The list of events in the History area is erased when you shut down your
computer. If you want to keep track of the events occurred and be able to
view them afterwards, you should create a connection log in text file format.
To create the text file, select the Create connection log check box. To save the
file in a different folder, click Browse and select a folder. All events that occur
from now on will be listed in a text file. To view this file, click View Log.
The text file contains only the events that have occurred after
selecting the Create connection log check box. Therefore, if you want
to be able to view all the events from the very beginning of establishing
the connection, you should select the check box before connecting to
SIM services.
You may need to update the network profile that is used for accessing SIM
services. Your service provider can, for example, put the new profile on their
Web page where you can download it.
To get an updated network profile from your service provider's Web site,
click the Update button and type the correct Web address in the text box.
Click OK and your Web browser opens.
When you type your service provider's Web address, click the Set
As Default button. The Web address is stored to the system registry and
is displayed in the text box every time you click the Update button.
37