Nokia ?110 User Manual page 14

The Nokia C110/C111 operates in the 2.4 GHz frequency band. You need to
specify a radio frequency channel on which the wireless LAN card is used.
The selection of available channels may vary from country to country, as
certain countries have a limited number of channels that can be used.
You can select the Automatic channel selection option when you are creating
a new profile with the Profile Wizard: you are automatically allocated an
available channel without needing to specify one. You can, however, also
select the correct channel yourself. In that case, make sure that the wireless
LAN card and the access point are using the same channel.
If you want to change the channel setting, go to the Profiles page and click
Edit.
The Nokia C110/C111 Wireless LAN Card connects your computer
automatically to the access point and network that offer the best quality for
communications. If you move the computer to another location within the
network and out of range of the access point, the roaming functionality will
automatically connect your computer to another access point that belongs to
the same network. As long as you remain within range of access points that
belong to the same network, your computer will stay connected to the
network.
Once you have installed the software for the Nokia C110/C111, you can
connect to a wireless LAN. For instructions on installing the Nokia C110/
C111, please see the Installation guide on the CD-ROM.
Insert the wireless LAN card firmly into the PC card slot of the computer.
1
See Figure 4.
Figure 4 - Inserting the card
14