Nokia ?110 User Manual page 34

To store data on a smart card:
Slide the smart card into the smart card slot of the Nokia C110/C111.
1
Make sure that the metal contacts of the smart card are facing down and
that the bevelled corner is on the right. See Figure 7 on page 42.
Insert the wireless LAN card in your computer and start the Nokia C110/
2
C111 program. Go to the Administrator page. In the Smart card area click
Add/Remove.
The Smart Card dialog box opens. Select the items on the left to be copied
3
to the smart card. Click the arrow button pointing to the right. If you want
to remove items from the smart card, select the desired items on the right
and click the arrow button pointing to the left.
You can type additional information about the smart card in the Smart
4
card description text box.
Click OK to save the selected items on the smart card.
5
Profiles are copied to a smart card when the Keep data after
storing on smart card check box is selected. If this check box is
cleared, the selected profiles will be removed - instead of being
copied - from the system to a smart card.
If you want to empty the contents of a smart card, click Erase All. Note that
all items on a smart card will be removed, including the smart card
description. If you want the program to re-read the contents of a smart card,
click Reload.
The system administrator can create installation disks which contain all the
necessary settings needed for accessing a wireless LAN. The custom
installation package can also be saved on a hard disk.
The installation disk can be used for distributing profiles. All the desired
settings and profiles can be copied to the installation disk, which then offers
an end user quick access to a wireless LAN. The end user does not have to
configure settings in order to be able to connect to a network.
To generate an installation disk:
On the Administrator page, in the Installation disk area, click Create.
1
The Installation Disk dialog box opens. The Profiles available list contains
2
the names of all the profiles found in the system registry . Select a profile
you want to save on the installation disk and click the arrow button
pointing to the right.
General settings are automatically copied to a disk, and do not
have to be selected separately like profiles.
The name of the selected profile is added to the list on the right. If you
want to remove a profile from the list, select it and click the arrow button
pointing to the left. Also select the pages you want to include on the disk. If
34