Nokia ?110 User Manual page 15

Note that the wireless LAN card is not inserted all the way
into the PC card slot and there is a gap between the protruding
extension box and the computer. Do not use excess force when
inserting the card.
Switch on your computer.
2
If you are using a smart card, enter the PIN code and click OK.
3
If the dialog box asking for your PIN code appears before the
network logon dialog box, type the PIN code first.
Open the program by right-clicking the Nokia C110/C111 icon on the
4
taskbar. A shortcut menu opens. Click Manager window or Profiles.
The Profiles page opens. Under Profile selection, select the profile you
5
want to use with the wireless LAN in question. Click Apply . You may need
to restart your computer. If you are about to connect to a new network and
therefore need to create a new profile, or if you need to modify an existing
profile, see "Creating new profiles" on page 21, or "Editing profiles" on
page 22.
In Windows 2000 and Windows NT 4.0, if you want to connect to
a wireless LAN when logging onto a domain, insert the wireless LAN
card into your computer and switch on the computer, then wait until
the small Nokia C110/C111 icon appears in the bottom right corner of
the screen. After that you can type your user name and password.
Ad hoc networks allow wireless stations to communicate directly with each
other without any access points. The stations can, for instance, share folders.
One user creates the ad hoc network and other users then join the network.
You can choose to use a password to protect the network from unauthorised
users. Only those stations that have the correct password can join the
network.
To start an ad hoc network:
On the Profiles page, select the Quick Ad Hoc profile and click Apply .
1
Give the ad hoc network a name. You can also define a password for the
2
network. Click Start.
Select an appropriate data rate: 2 or 11 Mbit/s. Note that all stations on an
3
ad hoc network must be using the same data rate. Click OK.
To join an ad hoc network:
On the Profiles page, select the Quick Ad Hoc profile and click Apply .
1
Select the network you want to join and click Join. If a password is used in
2
the network, type the password and click OK.
15