Table of Contents
Advertisement
Video output
RGB
Signal type
4:3
TV format
Letterbox
Picture conversion
Pan&Scan
OSD Transparency
Select
Back
and confirm
Video output
Signal type
RGB
TV format
16:9
Letterbox
Picture conversion
OSD Transparency
Modify
and confirm
SETTINGS
Selecting picture conversion for the television
If you have a 4:3 format television or flat screen, the following
settings are available:
»Pan&Scan« for wide-screen playback without black bars on the
top and bottom edges of the screen.
»Letterbox« for wide-screen playback with black bars on the top
and bottom edges of the screen.
In the »Main Menu«, select »Installation« with »P-« or »P+«
1
and press »OK« to confirm.
2
Select »Video output« with »P-« or »P+« and press »OK« to
confirm.
Select »Picture conversion« with »P-« or »P+« and then press
3
»OK«.
4
Press »P-« or »P+« to select the picture conversion and press
»OK« to confirm.
Press »i« and then »OK« to save the settings.
5
Selecting the transparency of the OSD
You can adjust the transparency of the OSD menu.
1
In the »Main Menu«, select »Installation« with »P-« or »P+«
and press »OK« to confirm.
Select »Video output« with »P-« or »P+« and press »OK« to
2
confirm.
3
Select »OSD Transparency« with »P-« or »P+« and then press
»OK«.
Press » « or » « to select the transparency and press »OK«
4
to confirm.
Back
5
Press »i« and then »OK« to save the settings.
______________________________________________
19
Advertisement
Table of Contents
