-
IEEE802.3af (DTE Power via MDI)
-
IEEE802.3at (DTE Power via MDI Enhancements)
-
IEEE802.3az (Energy Efficient Ethernet)
-
IEEE 802.3x (Full-duplex flow control)
•
AutoSensing and autonegotiating capabilities for all ports.
•
Auto Uplink™ on all ports to make the right connection.
•
Automatic address learning function to build the packet-forwarding information table. The
table contains up to 8 K Media Access Control (MAC) addresses.
•
Store-and-forward transmission to remove bad packets from the network.
•
Full-duplex IEEE 802.3x pause frame flow control.
•
Active flow control to minimize packet loss and frame drops.
•
Half-duplex backpressure control.
•
LEDs. Power LED, FAN Status LED, Max PoE LED, and LEDs for each port.
•
Internal open frame power supply.
•
Standard NETGEAR 5xx series chassis.
•
NETGEAR Green product series power-saving features:
-
Automatic power consumption adjustment based on the RJ-45 cable length.
-
Per-port automatic power down when the port link is down.
•
IEEE802.3az, EEE (Energy Efficient Ethernet) compliance.
GS516TP Gigabit Smart Switch
Introduction
7