Interface; Leds; Performance Specifications - NETGEAR ProSafe GS516TP Installation Manual

• Static routing
• MLD snooping
• DHCP snooping
• ACLs (MAC, IPv4, IPv6, and TCP/UDP based)
• DHCP client function
• Auto voice VLAN
• Protected ports
• Time-based PoE management
• Syslog
• Smart Control Center Discovery program auto discovers devices and sets system
configuration to each switch.
• Configuration backup and restore (easy to configure more than one switch)
• Password access control
• Firmware upgradeable

Interface

• Sixteen 10/100/1000 Mbps AutoSensing Gigabit Ethernet switching ports
• Ports 1-8 are PoE PSE ports providing up to 15.4W power
• Ports 15-16 are PD ports receiving power from power devices

LEDs

• Per port. Link/Act Mode, PoE status (ports 1–8)
• Per device. PD 15 and PD 16, Power, Fan, PoE Max

Performance Specifications

• Forwarding modes: Store-and-forward
• Bandwidth (per unit): 32 Gbps
• Address database size: 8 K Media Access Control (MAC) addresses per system
• PoE power budget:
- AC mode with Main AC power source: maximum 76W
- DC mode with AT+AT PD power source: maximum 22W
- DC mode with AT+AF PD power source: maximum 11W
• Mean time between failure (MTBF):
- 479,350 hours (~54.7 years) at 25°C
GS516TP Gigabit Smart Switch
Technical Specifications
28