Table of Contents
Advertisement
2.
Insert the screws provided in the rack-mount kit through each bracket and into the bracket
mounting holes in the switch.
3.
Tighten the screws with a No. 1 Phillips screwdriver to secure each bracket.
4.
Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head
screws with nylon washers through each bracket and into the rack.
5.
Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to the rack.
Check the Installation
Complete this task before applying power to the switch.
To check the installation:
1.
Inspect the equipment thoroughly.
2.
Verify that all cables are installed correctly.
3.
Check cable routing to make sure that cables are not damaged or creating a safety hazard.
4.
Ensure that all equipment is mounted properly and securely.
GS516TP Gigabit Smart Switch
Installation
20
- Quick Links:
- Configuration
- Management
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
