Table of Contents
Advertisement
uSB RECORDING
Connecting external data media
Notes:
Before connecting the data medium, switch
7
the television to standby with »
the device and then switch the television on
again.
Before removing the external data medium,
7
the television must be switched to standby,
so that no data loss occurs.
Your television features two USB sockets,
7
»uSB
HDD« and »uSB«.
»uSB
HDD« is used to connect data m edia,
which require an additional power supply
– for example, external hard disks.
1 Connect the
»uSB
t elevision and the corresponding socket of
the data medium (external hard disk) using
a USB cable;
or
Insert the USB plug of the USB memory stick
into the »uSB« socket of the television.
2 Confirm the display »
(green).
– T he file browser appears.
36
ENGLISH
--------------------------------------------------------------------------------------------------------------
8
«. Connect
HDD« socket of the
« with »
«
Notes:
The »uSB« socket of the television supplies
7
a maximum power of 500 mA in accord-
ance with USB specifications. External hard
disks which require more power may there-
fore only be connected to the »uSB
of the television.
If you use a network cable for external hard
7
disks which have been connected to the
»uSB
HDD« socket of the television, this
network cable must also be disconnected
from the power supply when the television is
switched off.
External data media may not be disconnect-
7
ed from the television while files on the data
medium are being accessed.
Settings for uSB recording
Selecting the menu
1 Open the menu with »i«.
2 Select the line »USB RECORDING« with
»
« or »
« and press »●« to confirm.
V
Λ
– T he »USB RECORDING« menu appears.
USB RECORDING
PRnP
Auto Preview
Manage data medium
Disk
Partition
Check Disk
Capacity Used
Used (MB)
Total (MB)
Remaining SD recording time
Remaining HD recording time
HDD«
20.09.2010
15:46
On
USB
C:
%3
1249
38145
1,008 min
288 min
Exit
Back
Advertisement
Table of Contents
