SpECIAL SETTINGS
Settings for motorised antennas
(DiSEqC 1.2)
Your television set supports motorised satellite
systems in compliance with DiSEqC 1.2. This
function allows the satellite antenna to be oper-
ated via the television set.
1 Open the menu with »i«.
2 Select the line »SOURCE SETUP« with »
or »
« and press »●« to confirm.
Λ
– T he »SOURCE SETUP« menu appears.
3 Select the line »DiSEqC 1.2« with »
or »
«. Select the option »On« with »
Λ
>
or »
«
– T he line »User Mode« is active.
Note:
Additional operations are explained in the
7
following sections.
62
ENGLISH
----------------------------------------------------------------------------------------------------------
user mode
You can adjust the alignment of the satellite an-
tenna to each individual satellite. These settings
will be saved so that the antenna can later be
easily guided to each saved alignment.
1 Select the line »User mode« with »
or »
Λ
– T he »USER MODE« menu appears.
«
V
2 Select the preferred option with »
or »
Λ
– » Satellite«: »Press ●«, select a satellite with
«
V
<
»
<
«
confirm.
– » Transponder«: »Press ●«, select the trans-
ponder from which the signal is being
r eceived with »
press »●« to confirm.
– » Moving Mode«: Use »
the option »Discrete« or »Continuous«.
– » Discrete«: Moves the antenna in d efined
– » Continuous«: Moves the antenna to the
– » Step Size«: Use »
number of steps with which the antenna
should turn. »Step Size« is only active
when the »Transport Mode« was set to
»Discrete«.
– » Move Motor«: Aligns the antenna with
the selected satellite. Use »
»West«, use »
– » Go To Stored Position«: Aligns the antenna
to a saved satellite position. Up to 50 posi-
tions can be saved. »Press ●« and then
select the saved position with »
Press »
na will be aligned with the saved position.
– » Store Stored Position«: The current anten-
na alignment is saved.
3 Press »
« and press »●« to confirm.
«.
>
«, »
«, »
« or »
« and press »●« to
V
Λ
<
>
«, »
«, »
<
steps to the west and the east.
west or east continuously.
<
« or »
>
« to align it to »East«.
« (green) to confirm – the anten-
i
« to end the setting.
«
V
«
V
« or »
« and
V
Λ
>
« or »
« to select
>
« to select the
<
« to align it to
<
>
« or »
«.