CONVENIENCE FuNCTIONS
Setting the date and time
Your television set detects the difference in time
to Greenwich Mean Time (GMT) automatically,
as long as the channel selected transmits a time
signal. You can also set the difference in time
manually – for example, when the correct time
is not detected automatically or does not corre-
spond to local time for other reasons.
1 Select the line »Time Adjustment« with »
then select the option »Manual« with »
>
or »
«.
– T he lines »Time Zone« and »Daylight Sav-
ing« are active.
2 Select the line »Time Zone« with »
press »●« to confirm.
– T he »Select Time Zone« menu appears.
3
Select the appropriate time zone with » »
>
»
«, »
« or »
and press »●« to confirm.
V
Λ
4 Select the line »Daylight Saving« with »
<
>
and use »
« or »
»Off« or »On«.
i
5 Press »
« to finish the setting.
Note:
If the option »Auto« is selected in the line
7
»Time Adjustment«, the television set auto-
matically adapts the time to the time signal
from the respective broadcaster. However,
different channels may also use time bases
which are different to those of your country;
e.g. foreign broadcasters. In these cases,
reminders and planned recordings may be
annulled due to the time difference.
« and
V
« to set the option »Auto«,
------------------------------------------------------------------------
Timer settings
Entering the switch-off time
(sleep timer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1 Select the line »Sleep Timer« with »
«,
V
»
«.
Λ
<
«
2 Enter the switch-off time with »
Note:
To switch off the function, use »
7
set the switch-off time to »Off«.
3 Press »i« to end the set-up.
Switch-on timer
<
«,
In the »Auto On« menu you can enter a switch-on
time for the television. After the preset time has
«
V
elapsed, the television switches on from standby
– at the preselected volume and the preselected
television channel.
1 Select the line »Auto On« with »
and press »●« to confirm.
2 Select the line »Mode« with »
<
use »
« or »
should switch on.
3 Select the line »Input Source« with »
<
and use »
4 Select the line »Service Type« with »
<
and use »
tion (ATV, DTV, Radio or DATA).
5 Select the line »Channel« with »
and use »
channel.
Note:
The line »Channel« is only active when the in-
7
put signal currently in use has been set. If no
entry has been made, then the first channel of
the selected input source will be used.
<
« or »
« or »
V
>
« to select when the television
>
« or »
« to select the input source.
>
« or »
« to select the p referred op-
<
>
« or »
« to select the preferred
ENGLISH
« or
V
>
«.
<
>
« or »
« to
« or »
«
V
Λ
« and
Λ
« or »
«
V
Λ
« or »
«
V
Λ
« or »
«
V
Λ
49