Table of Contents
Advertisement
USBRECORDING
Connectingexternaldatamedia
Notes:
It is advised to put the television on stand-by
7
mode before connecting the Skype camera.
Before disconnecting the external data me-
7
dium, the television must first be switched to
standby, otherwise files can be damaged.
There are two USB inputs on the television,
7
namely USB2(HDD) and USB1.
USB1(HDD)input is intended for USB
devices that require additional power (e.g.
external hard disk).
USB2
(HDD)
1
Plug the external hard disk to the USB2
(HDD) USB interface of the television;
or
plug the memory stick in the USB1 socket
of the television.
44
ENGLISH
-------------------------------------------------------------------------------------------
Notes:
The socket USB1 of the television supports
7
500 mA current according to the USB stan-
dard. Devices such as external hard disk
and etc. that consume more power can only
be connected to the USB2(HDD)USB
interface of the television.
If you are using a power cable for the
7
external hard disk that you have connected
to the USB2(HDD) USB interface, then
the power cable of the external hard disk
must also be unplugged when the TV is
turned off.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device
is being read by the TV.
Advertisement
Table of Contents
