Table of Contents
Advertisement
SpECIAL SETTINGS
Expert mode
You can restrict the antenna's range or reset
the antenna.
1 Select the line »Installer Mode« with »
»
« and press »●« to confirm.
Λ
– T he »INSTALLER MODE« menu appears.
2 Select the preferred option with »
or »
«.
Λ
– » Limit Position«: Defines the range in
which the antenna may move. Use »
to set the western limit, use »
eastern limit.
– » Move Motor«: Aligns the antenna with
the selected satellite. Use »
antenna to »west«, use »
antenna to »east«.
– » Go To Stored Position«: Press »●« to save
the current antenna alignment.
– » Store Stored Position«: Aligns the antenna
with the reference point of the positioner.
– » Reset DiSEqC 1.2 Limit«: Resets the limit
position of the antenna.
----------------------------------------------------------------------------------------------------------
Searching for television chan-
nels from the cable provider
automatically
« or
1 Open the menu with »i«.
V
2 Select the line »SOURCE SETUP« with »
«
V
3 Select the line »Source« with »
<
«
>
« to set the
4 Select the line »Automatic Channel Scan«
<
« to align the
>
« to align the
5 Select the line »Country« with »
6 Select the line »Scan Typ« with »
7 Select the line »Cable Scan Type« with »
or »
« and press »●« to confirm.
Λ
– T he »SOURCE SETUP« menu appears.
or »
« and press »●« to confirm.
Λ
Select the option »Cable« with »
»
« or »
« and press »●« to confirm.
V
Λ
with »
« or »
« and press »●« to confirm.
V
Λ
– T he menu appears.
and press »●« to confirm. In the country se-
lection menu, select the country with »
»
« or »
« and press »●« to confirm.
V
Λ
and set the option »DTV« with »
or »
« and set the option »Quick« or »Full«
Λ
<
>
with »
« or »
«.
– T he search function »Quick« sets the chan-
nels according to the information provided
by your cable provide in the transmission
signal.
– I f the option »Full« is selected, the entire fre-
quency range will be scanned. The search
can take a long time with this option. This
option is recommended if your cable pro-
vider does not support the search type
»Quick«.
Note:
You can accelerate the search. To do this,
7
you need information about the frequency
and network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet. For example, the
frequency 402MHz and network ID 61441
can be entered for Germany.
«
V
«
V
<
>
«, »
«,
« or »
«
V
Λ
<
>
«, »
«,
« or »
«
V
Λ
<
>
« or »
«.
«
V
63
ENGLISH
Advertisement
Table of Contents
