Changing Stored Analogue C Hannels - Grundig FINEARTS 55 3D DL User Manual

SpECIAL SETTINGS
If fine tuning is necessary, select the line
7
»Fine Tuning« with »
>
or » « to make the setting.
7 Press »
« (blue) to save the setting.
Note:
If you wish to remedy other television
7
channels, repeat steps 4 to 8.
8
Press »i« to end the setting.
----------------------------------------------------------------------------------------------------------
<
« or » « and use »
V Λ
Changing stored analogue
«
channels
If channels were stored with the automatic chan-
nel search while tuning the television channels,
you can delete them. You can also store chan-
nels in a different preset, change or enter the
name of a channel as well as skip channels.
Selecting a channel list
Note:
Analogue channels can be selected if the
7
option »Air« or »Cable« has been selected.
1 Open the menu with »i«.
2 Select the line »SOURCE SETUP« with »
or » « and press »●« to confirm.
Λ
– T he »SOURCE SETUP« menu appears.
3 Select the line »Program Table« with »
» « and press »●« to confirm.
Λ
– T he »PROGRAME TABLE« menu appears.
Note:
Additional operations are explained in the
7
following sections.
Deleting channels
1 In the »PROGRAME TABLE« menu, select the
television channel to be deleted with »
<
» «, » « or »
Λ
confirm.
2 Press »
« (yellow) to confirm the deletion
process.
Note:
» « (blue) allows all television channels to
7
be deleted.
3 Press »
« (green) to confirm the deletion
process.
>
« and press » « (red) to
ENGLISH
«
V
« or
V
«,
V
67