Tuning The Television Channels From Satellite (Dvb-S) - Grundig FINEARTS 55 3D DL User Manual

Color television
Table of Contents

Advertisement

SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Tuning the television channels
from satellite (DVB-S)
You have two options for tuning digital satellite
channels.
A The easy installation,
w hich pre-configures all antenna settings for
the satellite channels on Astra 19.2° East.
B The advanced installation
c an be used if you wish to receive satellite
channels from various satellites. To do so,
you must make the antenna settings (Satel-
lite, LNB Power, LNB Type, DISEqC Mode,
LNB Selection) for the satellites chosen.
Easy installation
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
<
>
with »
« or »
«.
2 Select the line »Easy Installation« with »
or »
« and press »●« to confirm.
Λ
– O ther menu options will be displayed,
the satellite Astra 19.2° East is preset.
3 Start the scan with »
– T he »Search results« menu appears, and
the scan for TV channels begins.
– D epending on the number of television
channels received, this can easily take a
few minutes.
– T he scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
You can abort the scan by pressing »
7
«
V
« (green).
i
«.
Advanced installation
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
<
>
with »
« or »
«.
2 Select the line »Advanced Installation« with
»
« or »
« and press »●« to confirm.
V
Λ
– T he menu appears.
INSTALLATION
ANTENNA SETTINGS
Satellite
Transponder
LNB Power
LNB Type
22 kHz
DISEqC Mode
LNB Selection
Quality
Signal strength
3 Select the line »Satellite« with »
and press »●« to confirm.
– T he »SELECT SATELLITE« menu appears.
Select the satellites with »
>
»
« and press »●« to confirm.
Note:
The setting in the line »Transponder« is not
7
required for this automatic scan.
4 Select the line »LNB Power« with »
»
«.
Λ
Depending on the type of LNB, set the LNB
power supply to »13/18 V« or »14/19 V«
<
>
with »
« or »
«.
5 Select the line »LNB Type« with »
and press »●« to confirm.
Select the type of LNB installed with »
>
or »
«.
Save the selection with »
the action with »
20.09.2010
15:46
ASTRA 2A°,E
10714 MHZ H
Off
Universal
Auto
Off
1/4
Low
Normal
Good
Exit
Auto Tuning
Back
Manual Tuning
« or »
V
<
«, »
«, »
V
Λ
V
« or »
V
« (green) or abort
« (red).
ENGLISH
«
Λ
« or
« or
«
Λ
<
«
15

Advertisement

Table of Contents
loading

Table of Contents