Power Light; Panel Control - Kogan KALED30MONA User Manual

Panel Control

•
MENU key(menu/choice)
" "
Activate the OSD menu or function adjustment confirmation. \
•
Source Signal Key/Automatic Adjustment/Exit:
" "
1. Switch the signal shortcut key
2. When the OSD menu is active, this button could be regarded as the exit button (quit OSD
menu)
3. When the OSD menu is in the closed position, press this button for more than 3 seconds
and it will enter into the automatic adjustment function. The automatic adjustment function
will be set the level position, the vertical position, clock and focus.
•
Volume Control Button
" Vol-"
Press this button to decrease volume.
•
Volume Control Button
"
Vol+"
Press this button to increase volume.
•
Key/Hot Key：
"▼"
• Press this button to directly enter into the selected hotkey types corresponding to the
hot key function.
• When the OSD directory is in the active situation, it could be regarded as the functional
regulating key.
•
Key/Dynamic Contrast Ratio(DCR) Adjustment Key:
"▲"
• Press this button to directly enter into the selected hotkey types corresponding to the
hotkey function;
• When the OSD directory is in the active situation, it could be regarded as the functional
regulating key.
•
Powerlight:
Green: booting situation
Flicker: deplaning
Note：
• Don't put the monitor in places near to the heat source, such as a space heater, oven or
fireplace. Also do not put it in the places surrounding by dust or mechanical vibration.
• Keep the original packaging materials. If you need your monitor transported, it will
be far more convenient.
• In the event of the monitor being needed to be returned back to Kogan for servicing under
warranty, we recommend you ship the monitor back to us in the original packaging.
• In order to maintain the cleanness of LCD screen, we need to regularly use a clean soft
cloth to wipe away dust. Any liquid may damage the display screen.
• To keep the displays look good, we need to clean it regularly with soft cloth, as to the
overcoming mark, we use the downy cleaner. Don't use strong cleaner, such as diluent,
benzene or corrosive cleaner, because these things will damage the shell. For safety, pull
out the power plug before cleaning.