Advertisement
1.
Insert the DVI cable, HDMI cable, DisplayPort cable or VGA cable into the PC output port.
We recommend using one of the digital options (HDMI or DisplayPort)
DC IN
2. The monitor has a wide power voltage range; it can be used on AC100-240V~ 50/60Hz
power supplies.
3. Connect the power cable to the monitor power socket, and to the power source in the
room.
4. Turn on the power source supply.
5. To switch on the monitor, press the power control key.
The right side of the monitor has five keys that will adjust
the monitor settings with aid of the OnScreen Display.
1
MENU
2
3
DOWN
4
VOL +
5
VOL -
6
AUTO
7
Press
, and the main menu will appear as below
Press
to select
HDMI connector
Audio connector
Show main menu
UP
Adjust the options – move up or higher/Hotkey
Adjust the options – move down or lower/Hotkey
Increase sound level/Adjust the options – move right
Decrease sound level/Adjust the options – move left
Exit main menu/when no menus – auto adjust image/display
source list
Power ON/OFF
in the main menu, then press
DVI connector
VGA connector
2
DisplayPort connector
to enter.
Advertisement
