Kogan KALED30MONA User Manual page 11

Wrong Information and Possible Solutions
No signal lines connected:
1. Check the cable plugs to assure the connection is secure. If the connector becomes loose,
please tight the screws.
2. Check whether the pins which connect signal lines are damaged.
Input is not supported:
Your computer is set in the wrong display mode, please reset your computer display settings
to display a supported mode.
Attachment
Datasheet
LCD Panel
Input
Dot Frequency
Maximum Resolution
Plug and Play
Power Consumption
Input Port
Maximum Image Size
Power Source
Ambient Temperature
Humidity
Size
Weight
Display device TFT color LCD monitor
Size 75.62cm(30inch)
Dot Pitch 0.2505mm(horizontal) ×0.2505mm(vertical)
Video Red, blue, green analogue interface
Separation
Synchronous Line/Field TTL
Line Frequency 31kHz –96kHz
Field Frequency 60Hz
268.5MHz
2560×1600@60Hz
VESA DDC2BTM
Operating ≤110W
Standby ≤3W
VGA-15pin port（simulation 0.7Vpp polarity
signal/75Ω）
Dual-link DVI-D (24+1pin port)
DP-1.2 port
HDMI-1.4 port
HORIZONTAL: 641.28mm
VERTICAL: 328mm
AC 100~240V, 47~63Hz
Using temperature: 0C to 50C
Storage temperature: -20C to 60C
Operation relative humidity : 10% to 85%
697×476×512(L×W×H)mm
Gross Weight: 12.2KG
Net Weight: 8.7KG