Download Print this page
Kogan KALED27MONSC Quick Start Manual

Kogan KALED27MONSC Quick Start Manual

27'' full hd led monitor

Advertisement

Quick Links

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVERS (OR BACKINGS).
NO USER SERVICEABLE PARTS ARE INSIDE. REFER ALL SERVICING TO KOGAN.COM
TECHNICIANS.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy, and if not installed and
used in accordance with these instructions, may cause harmful interference to radio
communications. However, there are no guarantees that interference will not occur in a
particular installation.
Changes or modifications not expressly approved by Kogan.com could void the
user's authority to operate the equipment.
Do not attempt to modify this product in any way without written authorization from
Kogan.com. Unauthorized modifications could void the user's authority to operate
this product.
To prevent fire or shock hazards, do not expose this product to rain or moisture.
Safety Instructions
Read these instructions
Keep a copy of these instructions handy for future reference
Heed all warnings
Do not use this product near water
Clean only with a dry, soft cloth
Do not block any ventilation openings
Do not install near any heat sources such as radiators, stoves, ovens or other items
that produce heat
Protect the power cord from being walk on or pinched, particularly at plugs and
where the cord exits the monitor itself.
Use only with the stand supplied or with a mount recommended by Kogan.com.
Unplug the monitor during lightning storms or when it will be unused for an extended
period of time.
Do not expose the monitor to dripping or splashing water, and ensure that no objects
filled with liquids (such as a vase) is located near the monitor where it could tip and
spill.
1

Advertisement

loading

Summary of Contents for Kogan KALED27MONSC

  • Page 1 Protect the power cord from being walk on or pinched, particularly at plugs and • where the cord exits the monitor itself. Use only with the stand supplied or with a mount recommended by Kogan.com. • Unplug the monitor during lightning storms or when it will be unused for an extended •...
  • Page 2 Please check that all of the following is supplied: Monitor Quick Start Guide Power Cord VGA Cable Audio Cable DVI Cable AC 100 – 240V ~ 50/60Hz 1.1A DC 12V 3A, 4A, 5A Indicator Mode No light Power off Green light Normal working conditions Green light flashing Powered with no input signal...
  • Page 3 HDMI Audio Out Power Connect the power cord for your monitor into the AC IN port on the back of the monitor. 2. Plug the power cord into an nearby power outlet. 3. Use an input connection cable that's appropriate for your computer. Luminance 2.
  • Page 4 Clock Adjustment: press MENU to show the options in frequency adjustment, then press • up or down to adjust the image clock to track stability. Phase Adjustment: press MENU to show the options in phase adjustment, then press up • or down to start pixel sampling.
  • Page 5 Input interface D-SUB 15pin VGA Input Input signal Analog 0.7pp anode signal/75amp Input interface DVI-D 18 pin DVI Input Input signal 10bit digital signal Input interface 19pin HDMI Input Input signal 18Gbps H-Frequency 30 – 80 Khz V-Frequency 60 – 75 Hz Storage Temp °...