Specifications - Dynex DX-32L100A13 User Manual

Specifications

Problem Solution
After Auto • Reception can vary by channel depending on
Channel Search, the broadcast power level of a given station.
there are no Contact your cable or satellite TV provider.
channels • Make sure the antenna or cable/satellite box is
connected securely to your TV.
• Try replacing the cable between the
antenna/cable or cable/satellite box and your
TV.
One or more • Make sure that the channels are not blocked.
channels do not See "Setting parental control levels" on
display. page 26.
• Make sure that the channels are not hidden.
The channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add
the channel back to the channel list. See
"Hiding channels" on page 23.
• If you are using a cable or satellite box, use the
remote that came with that box to change
channels.
• Make sure you have the correct input selected
to view channels from the cable or satellite
box.
• If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see "Checking the digital
signal strength" on page 25.
Password is lost. • Enter 9999 to access parental controls, then
set a new password. See "Setting or changing
the password" on page 25.
Some settings • If a setting is grayed, the setting is not
cannot be available in the current video input mode.
accessed.
TV cabinet creaks. • When the TV is in use, the temperature rises
naturally and may cause the cabinet to expand
or contract which can cause a creaking noise.
This is not a malfunction.
Control buttons • Make sure that the Button Lock option is set
do not work to No. See "Locking control buttons" on
page 26.
• Unplug the power cord, wait a few seconds,
then plug the cord back in and turn on your
TV.
TV keeps turning • Make sure that the sleep timer is not turned
off on. See "Setting the sleep timer" on page 30.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your TV, then
turn it on again.
Specifications
Specifications are subject to change without notice.
Warranty
DX-32L100A13
Parts: 1 year
Labor: 1 year
Dimensions and weight
DX-32L100A13
Without stand:
31.0 × 4.4 × 19.5 in.
(78.65 × 11.09 × 49.55 cm)
31.0 × 9.1 × 21.5 in.
(78.65× 23.18 × 54.65 cm)
Without stand:
18.01 lbs. (8.2 kg)
19.41 lbs. (8.6 kg)
Screen
DX-32L100A13
Screen size measured diagonally
Display type
Panel 60 Hz vs.120 Hz
Display resolution
Panel resolution
Aspect ratio
Contrast ratio (typical)–panel
Dynamic contrast ratio - list value
Brightness (center typical) cd/m2
Comb filter
Response time
Horizontal viewing angle
Vertical viewing angle
Display resolutions/VGA scan rates
DX-32L100A13
HDMI 1.3
Component video
PC/VGA
Tuner
DX-32L100A13
Analog
Digital
DX-32L100A13
With stand:
With stand:
31.5"
LCD
60Hz
720p
1366 (H) × 768 (V)
16:9
3000:1
6000:1
300 nits
3d y/c digital
8 ms
160
160
Suggested Resolutions:
1080p, 1080i, 720p,
480p, 480i
Suggested Resolutions:
1080i, 720p, 480p, 480i
Suggested scan rates:
640 × 480/60Hz,
800 × 600/60Hz,
1024 × 768/60Hz,
1360 × 768/60Hz
NTSC
ATSC, 8-VSB, Clear-QAM
37