Heart Rate/Stopwatch Mode - Acumen EXCEL Instruction Manual

10. Smart Lite (blinking)
- Set on or off with the
Mode or / button.
This feature activates the night light with
any button pressed between the hours
of 6pm to 6am. Setting it off will conserve
battery life.
- Press the SET/STR/STOP button to exit the
setting mode.
Helpful Tip: If you make a mistake, just continue
to press the LAP/RESET button to get back to
the item you wish to correct.

Heart Rate/Stopwatch Mode

Heart Rate - From Time/Date mode press MODE
button once to enter Heart Rate/Stopwatch
mode and begin your exercise. If your
transmitter is correctly attached, the running
man indicator on the watch display should
begin to blink and your current heart rate in
beats per minute will come up in the box at the
upper right corner of the display. If no heart
rate is detected for 5 minutes, the heart rate
circuit will turn itself off. The " " indicator tells
if the heart rate circuit is on. To turn it back on
after it has shut off, simply restart the Heart
Rate mode by clicking the MODE button.
The Stopwatch - From the Heart Rate/Stopwatch
mode press the SET/STR/STOP button to start
or stop the stopwatch, timers and memory
recording features. You can pause and restart
the stopwatch by clicking the SET/STR/STOP
button. You can also press the MODE button to
view the Recall or Time/Date mode without
interrupting the stopwatch. When you have
finished, simply press the SET/STR/STOP button
to end the recording, then press the MODE
button to proceed to the Recall or Time/Date
mode.
.
10
WEIGHT
30
AGE TOTAL TZ HIGHLOW
PM
5
* Quick Start/Stop - This feature instantly takes
you to the Heart Rate/Stopwatch Mode and
starts or stops the stopwatch from any mode
with the SET/STR/STOP button.
Setting Target-Trac & Interval Timer
Target-Trac Timer - The Target-Trac graph will
provide an indication of how much time you
have spent in your target zone. It will produce
4 long beeps when you have reached your set
goal (the display graph will continue and restart
when exceeded).
Inter val Timer - The Inter val Timer is
independent of the Target-Trac and its alarm
produces one long beep.
Both timers are only activated when stopwatch
is running, both are continuous and start again
after reaching their alarm setting.
1. From Heart Rate/
Stopwatch Mode press
and hold the SET/STR
/STOP button to enter
the setting mode.
2. Interval Timer (blinking)
- set the minutes by
using the MODE or
/ button.
- Press the LAP/RESET
button to proceed to
the next item.
3. Target-Trac (blinking)
- set the Goal Alarm by
using the MODE or /
button.
- Press the LAP/RESET
button to proceed to the
next item.
BPM
AVG CAL
WEIGHT
AGE TOTAL TZ HIGHLOW
PM
AVG BPM CAL
WEIGHT
AGE TOTAL TZ HIGHLOW
11