Pnp/Pci Configurations - Gigabyte 6OMM7 User Manual

6OMM7 Motherboard

PnP/PCI Configurations

CMOS Setup Utility -Copyright( C ) 1984-2000 Award Software
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Reset Configuration Data
Disabled Disable this function. (Default value)
ESCD Clear PnP information in ESCD.
DMI Update Desktop Management Information data.
Both Clear PnP information in ESCD & update DMI data.
Resources Controlled by
Manual
Auto (ESCD)
IRQ ( 3,4,5,7,9,10,11,12,15 )
PCI Device
Reserved
PnP/PCI Configurations
Figure 8: PnP/PCI Configurations
User can set the PnP resource (I/O Address, IRQ & DMA channels)
used by legacy ISA DEVICE.
BIOS automatically use these PnP rescuers. (Default value)
The resource is used by PCI device.
Set the resource to reserved.
63
Disabled
Menu Level 4
Auto (ESCD)
Press Enter
When resources are
controlled manually,
assign each system
Disabled
interrupt a type,
depending on the type
of device using the
interrupt
Item Help