Using Auto Lap By Position - Garmin EDGE 500 Owner's Manual

Using Auto Lap by
Position
You can use Auto Lap to automatically
mark the lap at a specific position.
This feature is helpful for comparing
your performance over different parts
of a ride (for example, a long climb or
training sprints).
1. Press and hold MENU.
2. Select Settings
Auto Lap.
3. In the Auto Lap Trigger
By Position.
select
4. Select an option:
• Select Lap Press Only
trigger the lap counter each time
you press
you pass any of those locations
again.
Edge 500 Owner's Manual
> Bike Settings
field,
to
LAP
and each time
• Select
trigger the lap counter at the
GPS location where you press
START
during the ride where you press
LAP.
• Select
the lap counter at a specific GPS
location marked before the ride
and at any location during the
ride where you press LAP.
>
5. Customize optional lap data fields
(see page
6. Go for a ride.
NOTE: During courses, use the
Position
option to trigger laps at all of
the lap positions saved in the course.
Training with Your Edge
Start And Lap to
and at any location
Mark And Lap
37).
to trigger
By