Garmin EDGE 500 Owner's Manual page 59

Problem
My Edge is connected
to the computer, but it
will not go into mass
storage mode.
I cannot see any new
removable drives in
my list of drives.
My course file was
renamed.
Some of my data is
missing from my
Edge history.
I need to replace the
bands for the mount.
Edge 500 Owner's Manual
Solution
You may have loaded a corrupted file.
1. Disconnect the Edge from your computer.
2. Turn off the Edge.
3. Press and hold
computer.
Continue pressing
goes into mass storage mode.
If you have several network drives mapped on your computer,
Windows may have trouble assigning drive letters to your
Garmin drives. See the Help file for your operating system to
learn how to assign drive letters.
You can load .tcx and .crs files to the Edge. When you select
the course for any reason, the file is converted to a .fit course
file.
When the Edge memory is full, it will no longer record data.
Transfer data to your computer regularly to avoid losing data.
Go to http://buy.garmin.com, or contact your Garmin dealer.
Purchase bands made of EPDM only.
MENU while you connect the Edge to your
MENU
for 10 seconds or until the Edge
Appendix
55