Wi-Fi Settings; About Training Settings; Customizing The Data Screens; Using Auto Pause - Garmin Edge 1000 Owner's Manual

Missed Calls and Texts: Displays missed phone notifications
from your compatible smartphone.
Wi‑Fi Settings
Select > Wi-Fi.
Wi-Fi: Enables Wi‑Fi wireless technology.
NOTE: Other Wi‑Fi settings appear only when Wi‑Fi is
enabled.
Auto Upload: Allows you to upload activities automatically over
a known wireless network.
Add Network: Connects your device to a wireless network.

About Training Settings

The following options and settings allow you to customize your
device based on your training needs. These settings are saved
to an activity profile. For example, you can set time alerts for
your racing profile and you can set an Auto Lap position trigger
for your mountain biking profile.

Customizing the Data Screens

You can customize data screens for each activity profile.
1 Select > Activity Profiles.
2
Select a profile.
3 Select Data Screens.
4
Select a data screen.
5 If necessary, enable the data screen.
6
Select the number of data fields to appear on the screen.
7 Select .
8
Select a data field to change it.
9 Select .

Using Auto Pause

You can use the Auto Pause feature to pause the timer
automatically when you stop moving or when your speed drops
below a specified value. This feature is helpful if your ride
includes stop lights or other places where you need to slow
down or stop.
NOTE: History is not recorded while the timer is stopped or
paused.
1 From the home screen, select
2
Select a profile.
3 Select Auto Features > Auto Pause.
4
Select an option:
• Select When Stopped to pause the timer automatically
when you stop moving.
• Select Custom Speed to pause the timer automatically
when your speed drops below a specified value.
5
If necessary, customize optional time data fields
(Customizing the Data Screens, page
The Time - Elapsed data field displays the entire time
including paused time.

Marking Laps by Position

You can use the Auto Lap feature to mark the lap at a specific
position automatically. This feature is helpful for comparing your
performance over different parts of a ride (for example, a long
climb or training sprints). During courses, use the By Position
option to trigger laps at all of the lap positions saved in the
course.
1
From the home screen, select
2
Select a profile.
3
Select Auto Features > Auto Lap > Auto Lap Trigger > By
Position > Lap At.
14
> Activity Profiles.
14).
> Activity Profiles.
4
Select an option:
• Select Lap Press Only to trigger the lap counter each
time you select and each time you pass any of those
locations again.
• Select Start and Lap to trigger the lap counter at the GPS
location where you select
the ride where you select
• Select Mark and Lap to trigger the lap counter at a
specific GPS location marked before the ride and at any
location during the ride where you select
5 If necessary, customize the lap data fields
Data Screens, page 14).
Marking Laps by Distance
You can use Auto Lap to automatically mark the lap at a specific
distance. This feature is helpful for comparing your performance
over different parts of a ride (for example, every 10 miles or 40
kilometers).
1
From the home screen, select
2 Select a profile.
3
Select Auto Features > Auto Lap > Auto Lap Trigger > By
Distance > Lap At.
4
Enter a value.
5
If necessary, customize the lap data fields
Data Screens, page 14).
Using Auto Scroll
You can use the auto scroll feature to automatically cycle
through all of the training data pages while the timer is running.
1
From the home screen, select
2
Select a profile.
3
Select Auto Features > Auto Scroll.
4
Select a display speed.
Changing the Start Notice
This feature automatically detects when your device has
acquired satellites and is moving. It is a reminder to start the
timer so you can record your ride data.
1
From the home screen, select
2
Select a profile.
3
Select Start Notice.
4
If necessary, select Start Notice Mode.
5
Select an option:
• Select Once.
• Select Repeat > Repeat Delay to change the amount of
time to delay the reminder.
System Settings
Select > System.
• GPS Settings (GPS Settings, page
• Display Settings (Display Settings, page
• Data Recording Settings
page 15)
• Unit Settings (Changing the Units of Measure, page
• Configuration Settings (Changing the Configuration Settings,
page 15)
• Language Settings (Changing the Device Language,
page 15)
• Tone Settings (Setting the Device Tones, page
and at any location during
.
.
(Customizing the
> Activity Profiles.
(Customizing the
> Activity Profiles.
> Activity Profiles.
15)
15)
(Data Recording Settings,
15)
Customizing Your Device
15)