Ant+ Sensors; Tips For Pairing Ant+ Sensors With Your Garmin Device - Garmin EDGE 500 Owner's Manual

ANT+ Sensors

ANT+ Sensors
The Edge is compatible with the
following ANT+ accessories:
• Heart rate monitor
• GSC 10 speed and cadence sensor
(page 25)
• Third-party ANT+ sensors
(page 30)
For information about purchasing
additional accessories, go to
http://buy.garmin.com.
Tips for Pairing ANT+
Sensors with Your Garmin
Device
• Make sure that the ANT+ sensor
is compatible with your Garmin
device.
• Before you pair the ANT+ sensor
with your Garmin device, move
0
(page 21)
10 m away from other ANT+
sensors.
• Bring the Garmin device within
range (3 m) of the ANT+ sensor.
• After you pair the first time, your
Garmin device automatically
recognizes the ANT+ sensor each
time it is activated. This process
occurs automatically when you
turn on the Garmin device and
only takes a few seconds when
the sensors are activated and
functioning correctly.
• When paired, your Garmin device
only receives data from your
sensor, and you can go near other
sensors.
Edge 500 Owner's Manual