Rinnai Continuous Flow Water Heaters Operation Manual page 10

General Controller Information
Water controllers are an optional extra, they allow precise temperature control (no need to
mix hot and cold water). When used correctly, the hot water unit will deliver the selected
temperature, even when the water flow is varied, or when more than one tap is use.
Each water controller can be individually programmed, however the water heater can only
deliver one set temperature at any time. The available temperatures are as follows.
Kitchen
Bathroom (hot water)
Bathroom (bath fill)
Suggested temperatures Kitchen
To obtain water temperatures lower than 37 °C simply add cold water. Maintaining lower temperatures
helps save energy.
Rinnai controllers
• Universal (Compact):
• Kitchen Deluxe:
• Bathroom deluxe:
• Wireless:
Controller configurations
A maximum of four water controllers can be fitted and a combination of wired and wireless
controllers can be used with the following limitations:
• Maximum of one Kitchen Deluxe Controller (MC-100V)
• Maximum of two Bathroom Deluxe Controllers (BC-100V)
• Only one controller can be set to deliver 55 °C, this cannot be a Bathroom Deluxe
Controller
Rinnai New Zealand
Domestic 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50, 55 °C
Commercial 60, 65, 75 °C
37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50 °C
37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48 °C
50 - 55 °C
Shower 37 - 43 °C
Bath fill 39 - 45 °C
temperature selection only
temperature selection and voice prompting
temperature selection, shower saver, bath fill and voice prompting
temperature selection only
10
Continuous Flow Water Heater Operation Manual
01-09