Rinnai V2532FFU Series Operation & Installation Manual

Rinnai V2532FFU Series Operation & Installation Manual

Residential and commercial indoor unit

Advertisement

Operation / Installation Manual
(Residential and Commercial indoor unit)
WARNING: If the information in these instructions is not followed exactly, a fire
or explosion may result causing property damage, personal injury or death.
– Do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance.
– WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call the fire department.
– Installation and service must be performed by a qualified installer, service agency
or the gas supplier.
To Suit Models:
REU-V2520FFU......
REU-V2520FFUC...
REU-V2532FFU......
REU-V2532FFUC....
ANS Z21.10.3=CSA 4.3
R53
C53
R85
C85

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V2532FFU Series and is the answer not in the manual?

Questions and answers

Ed Skwara 609 558 7554
January 27, 2025

Rinnai model R53I – 1 temp is st 120°. followed the manuas instructions to increase the temperature to ****. I’m not successful.

1 comments:
Mr. Anderson
February 10, 2025

To increase the temperature on a Rinnai V2532FFU Series water heater, you need to use the MCC-45-4US remote control. Without this remote, the temperature is fixed at 140°F. With the MCC-45-4US remote control installed, you can adjust the water temperature between 96°F and 180°F.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF