What To Do If - Electrolux B5705-5 User Manual

What to do if ...

Problem
The oven is not heating up.
The oven lighting is not op-
erating.
A fault code that is not list-
ed above appears in the
clock display
If you are unable to remedy the problem by following the above suggestions,
please contact your local Service Force Centre.
Warning! Repairs to the appliance are only to be carried out by qualified service engi-
neers. Considerable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be chargeable,
even during the warranty period.
Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the oven door during (or
just after) baking or roasting may cause the glass to steam up.
Possible cause
The oven has not been
switched on.
The clock has not been set.
The required settings have not
been set.
The oven's automatic switch-
off has been triggered
The fuse in the house's electri-
cal wiring (fuse box) has been
tripped.
The oven light bulb is faulty.
Electronic fault
What to do if ...
Remedy
Switch oven on.
Set the current time on the
clock.
Check the settings.
See Automatic switch-off
Check the fuses. If the fuses trip
repeatedly, please call a qualified
electrician.
Replace oven light bulb.
Switch the appliance off and on
again via the building's fuse or
the safety switch in the fuse
box.
If it is displayed again, please
contact the Customer Care De-
partment
37