Table of Contents
Advertisement
36
Cleaning and Care
2. Insert the facing at the side of the door frame
so that both vents point towards the door
handle. Press the facing in and slide into place
starting from the door handle. The facing
snaps into place. Check the position again on
both sides.
3. Take hold of the door trim (B) at each side, po-
sition it on the inside edge of the door and
push the door trim (B) onto the upper edge of
the door
On the open side of the door trim (B) there is a
guide bar (C). This must be pushed between
the outer door panel and the guide bracket (D).
The clip lock (E) must be snapped in.
4. Replace the oven door.
Advertisement
Table of Contents
