Switching The Reception Information For The Currently Tuned In Dab Station; Making The Dab Settings; Dab Initialize - Denon DRA-F107 Owner's Manual

ENGLISH
Listening to DAB/DAB+ (For UK Model Only)
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SOURCE>
ON/STANDBY
[RANDOM]
[SOURCE]
[MENU]
[DAB/RDS]
[TIME/DISPLAY]
[ENTER/MEMO]

Switching the Reception Information for
the Currently Tuned in DAB Station
1
BUTTON
Perform steps 1 to 2 under "Tuning in DAB stations"
<BUTTON>
to tune in a DAB station.
[BUTTON]
2
[TIME/DISPLAY]
Press
b The display switches as shown below each time the button is
pressed.
q Data Label Segment :
Text data included in the broadcast is scrolled.
w Station Name :
The service station name is displayed.
e Program Type :
The category of the tuned in station is displayed.
r Ensemble Name :
ON/STANDBY
The ensemble name is displayed.
t Frequency:
The frequency is displayed.
y Signal Quality :
The reception signal sensitivity is displayed (0 to 100).
[REPEAT]
b If the reception signal sensitivity is 80 or greater, the
[6, 7]
program can be received without noise.
[8, 9]
u Audio Information :
The mode of the currently tuned in station and its bit rate are
displayed.
i Data and Time :
The current date and time are displayed.
[DOCK 1/3]
MENU
b When
[uiop]
to the currently displayed time.
[REMOTE/
BROWSE]
.
is pressed, the set's internal clock is updated

Making the DAB Settings

1
[DAB/RDS]
Press during DAB reception.
2
[u] [i]
Select "item" using and
[ENTER/MEMO]
.
[Selectable items]
Tuning Aid
:
The reception sensitivity of the currently tuned in frequency is
displayed.
b The program can be received without noise when the cursor move
to the right of the sensitivity display.
Station Order :
T
he service list is created with the auto scan function.
MULTIPLEX ALPHANUMERIC
(In order of frequency) (In alphabetical order)
DRC (
) :
Dynamic Range Control
Off 1/2 1
DAB Version :
The DAB module's version is displayed.

DAB Initialize

When the "DAB Initialize" procedure is performed, all the preset
memory settings for the stations and DABs are reset.
1
[MENU]
Press during DAB reception.
2
Select "TUNER SETUP" using
[ENTER/MEMO] [p]
press the or .
3
Select "DAB INITIALIZE" using
[ENTER/MEMO] [p]
press the or .
4
[ENTER/MEMO]
Press .
b Once initialization is completed, auto scanning is performed
automatically.
, then press the
[u] [i]
and , then
[u] [i]
and , then