Automatically Presetting Fm Stations (Auto Preset) - Denon DRA-F107 Owner's Manual

ENGLISH
TUNER Playback
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
TUNER <AUTO PRESET>
<PRESET/TUNING>
[NUMBER] (0~9, +10)
TUNER
[MENU]
[DAB/RDS]

About the FM Broadcast Reception Status Display
When the reception band mode is set to "FM AUTO", the "ST"
indicator lights when a stereo broadcast is tuned in.
BUTTON
<BUTTON>
[BUTTON]
If the signal is weak and stable stereo reception is not possible, select
"FM MONO" to receive in monaural.
Automatically Presetting FM Stations
(Auto Preset)
Up to 40 stations can be preset.
Auto preset is not possible with AM broadcast stations.
1
<AUTO PRESET>
Press
2
<AUTO PRESET>
Press
is flashing.
Broadcast stations are preset automatically.
Auto presetting with the remote control unit
1
[MENU]
Press .
2
Select "TUNER SETUP" using
[CLEAR/DEL]
[ENTER/MEMO]
press
3
Select "FM AUTO PRESET" using
[ENTER/MEMO]
press the
[CH–, CH+]
4
[ENTER/MEMO]
Press
is flashing.
Broadcast stations are preset automatically.
n Canceling auto presetting
TUNER [MENU]
Press or
[uiop]
[ENTER/MEMO]
Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
When the auto presetting operation is performed, the new presettings
overwrite the previous presettings.
Giving station names to preset channels
Names of up to 8 characters can be input.
1
.
2
while "FM AUTO PRESET"
3
[u] [i]
and , then
[p]
or .
4
[u] [i]
and , then
[p]
or .
while "FM AUTO PRESET"
.
NOTE
Tune in the preset channel you want to name.
[ENTER/MEMO]
Press twice.
The display switches to the station name input display.
Input the station name.
Names of up to 8 characters can be input.
[u, i] ······································
• button
[p] · ································
• button Moves the cursor to the right.
[CLEAR/DEL]
• button
···································
Deletes the currently selected character.
b Characters that can be input.
A ~ Z, 0 ~ 9, ^ ' ( ) * + , - . / = (space)
[ENTER/MEMO]
Press .
The characters you have input are entered.
b To give names to other stations, repeat steps 1 to 4.
Selects the character.