Listening To Fm/Am Broadcasts; Basic Operation; Presetting Radio Stations (Preset Memory) - Denon AVR-4308 Owner's Manual

ENGLISH
<SOURCE SELECT>
<TUNING PRESET>
[ TU]
( mode)
[A ~ G]
[BAND]
[MODE]
[SEARCH]
[CHANNEL]
[TUNER]
,
(AMP mode)
[SHIFT]
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
0
Listening to FM/AM Broadcasts
Basic Operation
1 1
Either turn
(AMP mode) to select "TUNER". (AMP mode) to select "TUNER".
: "Source Select"
2
To operate using the main remote control unit, set the
remote control unit to the TUNER (
(vpage 64 "Remote Control Unit Operations")
3
[BAND]
Press
4
Tune in the desired broadcast station.
q T o tune in automatically (Auto Tuning)
Press [MODE] to light the "AUTO" indicator on the display, then use
[df] to select the station you want to hear.
w T o tune in manually (Manual Tuning)
Press [MODE] to turn off the display's "AUTO" indicator, then use
[df]
[df] to select the station you want to hear.
[MEMO]
• It is also possible to switch to "FM" or "AM" in step 1 by pressing
[TUNER].
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold [df] to change
frequencies continuously.
[1 ~ 8] • The time for which the GUI menus are displayed can be set at GUI
menu "Manual Setup" – "Option Setup" – "GUI" – "Tuner" (vpage
36).
<SOURCE SELECT> [TUNER]
or press
(vpage 38, 39)
) mode.
to select "FM" or "AM".
Presetting Radio Stations
(Preset Memory)
Your favorite broadcast stations can be preset so that you
can tune them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
[MEMO]
Press .
3
[A ~ G]
Press to select the block in which the station is
[CHANNEL]
to be preset, then press
the preset number.
b The memory block can also be selected by pressing [SHIFT].
4
[MEMO]
Press again to complete the setting.
• To preset other stations, repeat steps 1 to 4.
• Stations can be preset automatically at GUI menu "Source Select"
– "Tuner" – "Auto Preset" (vpage 39).
NOTE
Preset stations are erased by overwriting them.
[1 ~ 8]
or to select