Table of Contents
Advertisement
CAUTION
We do not recommend that recording is carried out
while the background format is carried out, to avoid
the possibility of attempting recording on an unformat-
ted part of the disc.
Adding a new project
As a disc can contain more than one project, you can
also use the menu system to create a project on a disc
that has already been formatted, and contains a
project.
1 Press
and use the wheel and
MENU
select the
DVD
menu. From there, select the
sub-menu.
PROJECT
Adding notes to a project
Add notes on artists, recording details, etc. to a
project. Unlike a written disc insert or tape label,
these notes will always stay with the disc! You can
enter up to 1000 characters for session notes, etc.
1 Press
and use the wheel and
MENU
select the
menu. From there, select the
DVD
PROJECT
sub-menu.
2 Highlight the
PROJECT TEXT
.
ENTER
Figure 5.3: Adding notes to a project
Changing the current project
1 Press
and use the wheel and
MENU
select the
DVD
menu. From there, select the
sub-menu.
PROJECT
2 Highlight the
OPEN
sub-menu to show a list of
the names of all projects on the disc, together
with their sampling frequencies.
to
ENTER
to
ENTER
sub-menu and press
to
ENTER
5 – DVD playback & recording
We strongly recommend that you use discs exclusively
with the DV-RA1000 and do not use discs which have
been used on a computer, or for any other purpose.
2 Highlight
and press
CREATE
This brings up the screen allowing you to
enter the name and properties of a project, as
described in the previous section.
3 Use the soft keys and wheel (or an attached
PS/2 keyboard) to enter the text ("The DV-
RA1000 has two types of "home screen",
depending on whether a CD or DVD disc is
being used." on page 14). You can add more
lines to the notes than you can see on screen
and scroll up and down to view them.
4 Press and hold
ENTER
store the project text (brief presses of
add a carriage return). Press and hold
to exit without saving (brief presses
CANCEL
of
act as a delete key).
CANCEL
NOTE
Remember that this text will not be stored on disc until
you write the UDFMI (see "Important note on the file
system" on page 31).
The current project is shown with an arrow
beside the name.
Figure 5.4: Loading a project
3 Use the wheel to move the cursor to the
project to be loaded, and press
selected project is then loaded (the sampling
frequency is automatically changed).
TASCAM DV-RA1000 Owner's Manual
.
ENTER
for a second or so, to
ENTER
. The
ENTER
33
Advertisement
Table of Contents
