Table of Contents
Advertisement
4 – CD playback & recording
Repeat playback
Use the Virtual Front Panel (see "The virtual front
panel (VFP)" on page 17)
between single-track and whole disc repeat (and off).
The remote control unit's
these choices, but the RC-RA1000 also adds an A-B
repeat loop.
Jog playback
You can use the wheel to jog the playback position
backwards and forwards.
•
Press and hold the
READY
key.
PLAY
Both keys flash. You can now use the wheel to
move the play position back and forwards
through the current track/file.
Pitch change
This is another VFP function (see "The virtual front
panel (VFP)" on page 17) for playback only.
The reference clock must be set to the internal clock
for this feature to operate.
Move the cursor to the
PITCH
press
briefly to turn on pitch change.
ENTER
Press and hold
for about a second to enter the
ENTER
pitch change setting screen:
Figure 4.2: Pitch control
Auto cue
This allows the playback position to be cued to the
first point in a track (or file) where the audio rises
above the threshold level.
This feature can be used together with the auto ready
function ("Auto ready" on page 25).
NOTE
Note that this function is not available on DVDs
recorded in DSD mode.
24
TASCAM DV-RA1000 Owner's Manual
RPT
function to change
key also allows
REPEAT
key and press the
on-screen button and
A-B repeat
Use the
A-B
unit to set the A and B points. the first press sets the
A point, the next press sets the B point, and a third
press cancels the loop.
NOTE
This feature can also be used with DVD playback.
Press the
key alone to exit from the jog
READY
mode, and leave the playback position at the
position selected with the wheel.
•
You can also use the
RC-RA1000 remote control unit as jog keys.
NOTE
This feature can also be used with DVD playback, but
not in DSD mode.
Use the
and
keys to navigate, and the wheel to
F1
F2
set the value of the pitch (and speed) up to ±6% away
from nominal.
Press
to make the setting.
ENTER
Note that the digital I/O can function at ±6% of nom-
inal, but cannot function outside this range.
NOTE
This feature can also be used with DVD playback.
Use the Virtual Front Panel (see "The virtual front
panel (VFP)" on page 17)
remote control unit's
A.CUE
on or off.
NOTE
This feature can also be used with DVD playback, but
not in DSD mode.
key on the remote control
keys on the
JOG/DATA
ACUE
function or the
key to turn this function
Advertisement
Table of Contents
