Change/New Project; System Menus; System Settings - Tascam HD-P2 Owner's Manual

Continued from the previous page

Change/New Project

By default the HD-P2 automatically makes the first
project whenever new media is used. To make addi-
tional projects, or switch between projects, use the
Change/New Project menu from the Main menu.
In Figure 18 the menu shows the currently loaded
project (Project 09) and any other projects on this
Compact Flash card. If you select a non-loaded proj-
ect, like Project 02, the sub-menu provides the choices
of the project or
Loading Deleting
permanently removes all audio files and settings and
cannot be undone.
Figure 19 - Choose Template for New Project Screen

System Menus

System Settings

The System Menu can be accessed at all times, with
or without a Compact Flash card inserted. It controls
overall settings, information, and tools related to the
HD-P2 system as a whole.
Set System Time – Set the HD-P2's internal real-time
clock with date and time.
Audible Alerts – When the HD-P2 detects low power
or low disk space it will pop up warnings on the
screen. If this choice is set to
beep tones to the audio output. These are not re-
corded.
Power Management – Shows the current voltage levels
of AC, FireWire, and Battery power sources.
Audio Clock Information – Displays the measured types
and values of the
Word Clock
clocks. Also shows alerts and provides a reset
mechanism
Media Management – All media-related tools and in-
formation screens (i.e.
and ).
Format
Software Update – Used to check the current software
version and to install software updates.
Default Project Settings – Settings used by default when
a new project is created.
. Deleting a project
it will also send
On
, , , and
LTC S/PDIF Internal
, , ,
Get Info Clean-up Scan Erase
HD-P2 Screens and Menus
Figure 18 - Change or New Project Screen
If you select Create New Project you are prompted
to choose a Project Template as in Figure 19. The
Default Template is based on the Default Project
Settings in the System Menu. There may also be a list
of templates that you have saved from other projects,
like the file Proj0900 shown in Figure 19.
Figure 20 - System Menu Settings Screen
Project Templates – List of saved project templates
along with menus to delete, or rename them.
Default Project Settings and Project Templates are
stored on the CF card internally. These sections
remain active if a CF card is not present.
TASCAM HD-P2 Owner's Manual
Continued on the next page
17