Cadence*: On / Off; User Settings - Polar Electro CS600X User Manual

Shimano Dura-Ace CN-7701
Ultegra CN-HG92, 105
HG72,105 HG73
Shimano Sora CN-HG50
Campagnolo Record 2000, 10
Speed Chain
Campagnolo 10 Speed Chains
Chorus, Centaur
Campagnolo Veloce, Mirage, and
Xenon
For precise readings, all settings must be as accurate as possible. Chain length and weight are directly
proportionate to power value. If there is 1% error, the power value will also have 1% error.
There is no need to re-enter chain length and weight if links are removed. The system uses chain density
(weight/length). Removing links from the chain does not affect density.
For further information on Power settings, consult the power sensor user manual.
Use Polar ProTrainer 5 software for Power settings.
*Optional sensor required.

Cadence*: On / Off

You can install an optional Polar Cadence Sensor onto your bicycle.
To activate the cadence sensor in your cycling computer, select
is displayed.
Teach new sensor?
• If your sensor is already taught, select
• If your sensor has not been taught yet, see Using a New Accessory (page 55) for more information on
teaching.

User Settings

Enter accurate user information in the cycling computer to receive the correct feedback on your
performance.
To set user information in the cycling computer, select
• : To change units, press and hold LIGHT
Weight
• : To change units, press and hold LIGHT
Height
• : dd=day, mm=month, yy=year
Birthday
• : Male/Female
Sex
• : Top/High/Moderate/Low
Activity
• : HR , HR
Heart Rate
max
• VO : Maximal oxygen intake
2max
Activity Level
Activity level is an assessment of your level of long-term physical activity. Select the alternative that best
describes the overall amount and intensity of your physical activity during the past three months.
280 g
335 g
260 g
274 g
277g
.
No
sit
1473 mm
1473 mm
1473 mm
1473 mm
1473 mm
Settings > Bike > Bike 1 > Cadence > On
Settings > User
ENGLISH
.
Settings 39