Advertisement
Transforms the tank into an upright-type vacuum. With its separate motor
and revolving brush system, the Power Nozzle actually lifts your carpet.
The revolving brush gently sweeps the carpet clean of dust and dirt
particles deep in carpeting.
To attach, press down on wand until pin snaps into place and locks. The
flat area of the tube seal should face towards the front of the power nozzle.
Plug the external hose cord into the outlet on the top of the tool caddy
(Refer to #7, page 4) and the power nozzle. Use the straps to secure the
external hose cord to the flexible hose.
To disconnect, unplug the external hose cord from the power nozzle.
Position flat area of the tube seal to face toward the front of the pin. Push
in on flat area of the tube seal to release locking pin and pull.
When ordering a Power Nozzle, refer to the following:
Power Nozzle Grid
Tank
I
Model
/
Required Power Nozzle
/
Advertisement
