Chapter 2 Configuring the PoE IP Phone through LCD Phone menus ..............6 2.1 Initialize VIP-100PT/VIP-150PT ......................6 2.2 LCD Menu Configuration........................7 Chapter 3 Configuring the VIP-100PT/VIP-150PT through Web Pages ............16 Step 1. Browse the IP Address of your IP phone ..................16 Step 2. Input the login name and password .....................16 Step 3.
VIP-100PT / VIP-150PT deliver more convenience, efficiency, innovation and benefits of VoIP into routine tasks, and dailylife. PLANET PoE IP Phones – VIP-100PT / VIP-150PT are ideal IP phone solution for office / home use, as well as installation for Internet Telephony Service Provider (ITSP) from leading vendors. It's the delivery platform for IP voice services that makes your daily life benefit from the VoIP technologies.
IP address for Internet access. Various field applications compliant The VIP-100PT / VIP-150PT are capable of handling both peer-to-peer and H.323GK / SIP proxy registration, authentication, to interact with major H.323/SIP gateway/IP Phone on the market. VIP-150T offers the most flexibility and interoperability with PLANET and 3rd party VoIP vendors, allowing the deployment of both simple and complex VoIP networks such as ITSP, PC-to-Phone/Phone-to-PC or enterprise VoIP environments.
Keypad Description Menu/OK When the IP phone is at idle state, this key is used as “Menu” key to bring out the menu selection on the LCD display. When inside the menu selection/setting on the LCD display, this key is used as “OK”...
Page 6
And when the IP phone is editing some menu item’s contents, this key is used as “ right shift” to shift the cursor right a digit per each key press. CANCEL When the IP phone is entered into the menu selection, this key is used to escape to an upper layer of the menu selection.
RJ-45 connector, for Internet access, connected directly to Switch/Hub through straight CAT-5 cable. 12V DC 12V DC Power input outlet Ÿ When VIP-100PT/VIP-150PT are installed with 802.3af PoE device, please make sure the PoE is connected to Hint the machine WAN interface to be operational. Ÿ...
Configuring the PoE IP Phone through LCD Phone menus 2.1 Initialize VIP-100PT/VIP-150PT SETP 1: When power on the VIP-100PT/VIP-150PT, the LCD screen shows as below. Starting … SETP 2: Wait about 10 seconds, the main LCD screen shall be shown as following, and when the Internet access is available, the VIP-100PT/VIP-150PT will connected to the SNTP server.
PPPoE Password 2.1.3 Fixed IP IP Address Network Mask Default Route DNS Server 2.1.4 GMT 2.2 H323 (VIP-100PT) 2.2.1 Number 2.2.2 Password 2.2.3 H.323 ID 2.2.4 (Yes/No) Reg to GK 2.2.5 (Yes/No) Full RRQ 2.2 SIP (VIP-150PT) 2.2.1 Display Name 2.2.2 Login ID...
“View” menu In the “View” main menu, there are submenus, users may check these items for machine information and also provide some simple functions to check the network status of the IP Phone. 1.1 View current network settings By selecting “View” → ”Network”, you could see the active network parameters in machine. 1.2 Ping By selecting “View”...
Page 11
168.95.1.1) to ping it. When the response is ok, then the network configurations are completed. 2.1.3 GMT Via selecting the time zone in the GMT menu, VIP-100PT/ VIP-150PT is able to retrieve time information from timeserver on the net. →...
Page 12
VoIP vendor/service provider. 2.2.1 Registration to a H.323 gatekeeper (VIP-100PT) When VIP-100PT is installed in an H.323 GK enabled network, the VIP-100PT registers to the gatekeeper for voice communications. Following descriptions are parameters to complete the registration.
Page 13
RTPLowBW (Yes/No): This ability is to decrease the voice packet bandwidth of the transmit direction in order to improve the voice quality of transmit direction if the Internet bandwidth is not good enough. 2.2.1 Registration to a SIP Proxy Server (VIP-150PT) When the VoIP vendor/operator is running the SIP system, use the VIP-150PT to register to the proxy server.
Page 14
Date Time Means that the VIP-100PT is working OK and ready for outgoing/incoming calls. But the “GK mode ” flag is “No”, i.e. the VIP-100PT not need to register. In this case, can call the IP address of other VIP-100PT directly.
Page 15
Means that the VIP-150PT is working OK and ready for outgoing/incoming calls. The number inside braces () is the IP phone ’s number. SIP (Proxy Off) Date Time Means that the VIP-150PT is working OK and ready for outgoing/incoming calls. But the “Proxy On”...
Page 16
functions cannot work cannot hear any sound on the handset and the speaker. Only the menu selection can work, now. The PoE IP phone will continuously try to get the IP address from the DHCP server, so, if the DHCP server is responding, the DHCPFail() display will change to Hi() display to notify that the PoE IP phone is working OK.
Page 17
FWD (Number) Date Time Means that the VIP-100PT is working OK and ready for outgoing/incoming calls. But for any incoming call, it will be forwarded to the “Immediate Forward Number”; this PoE IP Phone will not ring. 2.3 Call Forward Configurations The PoE IP Phone supports three different kinds of call forward functions, please select “Configure”...
Configuring the VIP-100PT/ VIP-150PT through Web Pages VIP-100PT/VIP-150PT are equipped with a web-based graphical user interface that can cover most configurations and machine status monitoring. Via standard, web browser, you can configure and check machine status from anywhere around the world.
DNS Server: 168.95.1.1 Step 4. Start machine configurations Most important items are Network Configuration and H.323/SIP Configuration. Please remember to configure these commands before start to work with VIP-100PT/VIP-150PT. After parameter modifications, it is required to browse to the Note “System Configuration”...
VIP-100PT/VIP-150PT can obtain proper time information from the SNTP server. • You may enable different time zone to meet the location of VIP-100PT/VIP-150PT. For example, the time zone in Taiwan should be set as 8,which means GMT+8. PLANET PoE IP Phone User’s Manual...
Page 21
After setting up network parameters, be sure to apply settings (via “DONE” button) and browse to “System Configuration” menu to reboot the machine to make the settings effective Connection Type Data required. Dynamic IP (DHCP In most circumstances, it is no need to configure the DHCP client) settings..
IP phone is enabled in GK mode. • GK mode: Enable/disable Gatekeeper function. • GK IP: Set Gatekeeper IP address or Domain Name. • GK Port: communication port number of the Gatekeeper for VIP-100PT to send messages. PLANET PoE IP Phone User’s Manual...
3. SIP Configuration (VIP-150PT Only) Please select the “SIP Configuration” icon on the left menu; the following page will display to allow you to set all the SIP related configurations. PLANET PoE IP Phone User’s Manual...
SIP Parameters: Display Name: SIP identification • • Login ID: the username to register to Proxy Server. If Proxy server doesn’t request specific username, please enter line number here. Telephone Number: the telephone number of VIP-150PT to register to SIP proxy. •...
Advanced Setting: Reg From: Modify the “From:” field in the SIP/SDP messages. Should left this empty • unless for very specific system. • Reg To: Modify the “To:” field in the SIP/SDP messages. Should left this empty unless for very specific system. •...
if want to call a Taipei city call 02-12345678, the called number needed to be 886-2-12345678. But this is not consistent with the normal dialing behavior. In order to use the normal dialing behavior, you can set the “My Country Code” value to 886, and set the “Area Prefix Code”...
FTP Server: IP address of the FTP server, which contains the firmware file of the PoE IP phone • Image File Name: firmware file name of VIP-100PT/VIP-150PT. Configuration Backup/Restore: • FTP Server IP Address: IP address of the FTP server for system configuration backup/restore •...
Page 29
root / <no password>, you may modify the username/password for more security. Please enter the new login name, re-enter the current password, new password and confirm new password to enable new password. Reboot Button: Press the “REBOOT” button will reset the PoE IP Phone •...
In peer-to-peer mode, you can direct pickup the handset and dial the IP address of the remote VIP-100PT using the keypad as below: Then you may pick up the ringing VIP-100PT to start conversation. You may repeat the same steps to make calls from another VIP-100PT.
Page 31
In peer-to-peer mode, you can direct pickup the handset and dial the number using the keypad as below: Then you may pick up the ringing VIP-150PT to start conversation. You may repeat the same steps to make calls from another VIP-100PT. Ÿ If the IP address of the remote calling party is known,...
Page 32
SETP 2: After these configurations, be sure to click the “DONE” button to apply settings and browse to “System Configuration” menu to reboot the machine to make the settings effective After rebooting, the unit will communicate with the remote calling party, the LCD screen will show below: Registering (100) Date Time...
Appendix A PoE IP Phone Specifications Product H.323 PoE IP Phone SIP PoE IP Phone Model VIP-100PT VIP-150PT Hardware 1 x 10/100Mbps RJ-45 port (Power Over Ethernet 802.3af function) 1 x 10/100Mbps RJ-45 port LCD display 2 x 16 characters Speaker 8 Ohm/0.2 Watt speaker for speakerphone operation...