Performances Selection; Style Lock; How To Programme A Performance - Generalmusic WK1000 Owner's Manual

Arranger keyboard

Hide thumbs

Table Of Contents

Table of Contents

owners manual

A Performance allows to recall a custom sounds combinaton, including the Style data as described in detail

in the "STYLE" chapter. To recall a Performance, proceed as follows.

Press the PERFORMANCE RECALL buttons to

enter the Performance mode, the arrowhead

moves to [Performance] ﬁ eld

Use the function buttons (F1/F9) located be-

low the display to recall one of the 9 Perform-

ances of the ﬁ rst group (wk1000 default set-

ting is group 1)

Use the PAGE or the +/- buttons in the keypad

to access to the 7 groups of 9 Performances

each. The letter "P" and the relative group

number appears in the display, along with the

name of the single Performance selected.

TEMPO/DATA buttons can be used to control

the Tempo speed in Performance mode.

Since a Style is associated to a Performance, by re-

calling a Performance you will also recall the Style

assigned to it. If you prefer not to recall Styles auto-

matically, you can enable STYLE LOCK function: the

accompaniment will remain unchanged with all Per-

formances.

wk1000 contains 63 user-programmable Performances that you can modify according to your needs. The

Performance programming operations are quite simple. By programming a performance you will always

recall your favourite Sound combinations, Styles and panel settings.

BEWARE! The instrument MUST NOT be set to PERF mode - the left arrowhead of the display MUST

NOT indicate the PERF menu function.

Assign a Sounds to the tracks. Select a track with the corresponding function button (F1/F9) un-

der the display, and recall a Sound using the procedure already described. Use the TEMPO/DATA

keys to control the track volume.

Enable or disable the realtime section UPPER1-UPPER2-LOWER according with your needs.

Change the ON/OFF status of the accompaniment tracks (Drum, Bass, Acc1, Acc2, Acc3).

Press the corresponding function button repeatedly to obtain the OFF status. It is not possible to

change the ON/OFF status of the Real Time keyboard tracks with the corresponding function but-

tons (F7/F9) - see point 2 above. The ON/OFF status of a track can be seen at a glance by the

corresponding name (for example 'Drum') which appears if ON or cancels if OFF .

Modify the tracks volume

Use the Function keys (F1/ F9) to enter the desired track. The ﬁ rst page will be shown in the dis-

play. Press the CURSOR key once: the volume value will start blinking. Use the TEMPO/DATA key to

modify the volume.

Transpose the tracks

Use the Function keys (F1/F9) to enter the desired track. Press the CURSOR twice: the transpose

value will start blinking in the dsiplay. Use the TEMPO/DATA keys to raise or lower the pitch by a

semitone.

Modify the effects.

The ON/OFF status of the REVERB and CHORUS functions, the corresponding effect types and the

relative overall effect volume can be saved to the current Performance

When the track is blinking, it is possible to modify each value in the single section

Use te PAGE buttons to control the values.

sounds and performances